FR50 Series

 

FR50 Series



Komatsu’s FR Series of narrow aisle reach trucks feature new and innovative engineering ideas that show Komatsu’s commitment to conserving our environment and reducing your overall cost of ownership. AC drive and hydraulic controls offer smooth and efficient control of critical truck functions while giving you the extended run times and improved truck efficiencies. The rugged and heavy-duty mast and pantograph mechanism are built to handle the toughest work cycle.

A NEW LEVEL OF OPERATOR COMFORT

The Komatsu narrow aisle reach truck has a low step height, spacious cushioned floorboard and ample padding for greater levels of operator productivity while remaining alert and ready to work. The side-stance operator positioning provides maximum visibility for both loading and directional travel. The short steer arm and electrical steer-by-wire technology offer effortless maneuvering along with the multi-function control handle for speed and hydraulic functions.

ELECTRIC DISC BRAKE SYSTEM

An electric disc brake system on top of the drive motor armature shaft provides for smooth and consistent stops when releasing the brake pedal. The operator steps down on the rubber cushioned, floor mounted brake pedal and electrically releases the brake. When the operator steps of the truck, the raised pedal automatically applies the parking brake.

HEAVY DUTY MAST AND REACH CARRIAGE

The Komatsu FR Series uses tested and reliable components to reduce your overall cost of operation. The three stage mast and reach carriage features a rugged design that will deliver dependable service for the long haul. Mast features include: interlocking channel and I-beam design, hydraulic cushioning with the retract function for fragile load protection, and welded outriggers to the mast outer channel for added strength and support.

KEYPAD COMMUNICATION

A keypad on the dash communicates truck settings and on-board diagnostics. Truck performance settings can be adjusted through the keypad to achieve optimal performance parameters for your application needs. The keypad also displays state-of-battery charge, time of day and travel speed.

KOMATSUS ADVANCED AC TECHNOLOGY

The KICS AC control system has an advanced technology AC drive motor and an AC hydraulic motor to achieve high performance with minimal costs. The AC motor eliminates the need for motor brush checks or replacements and provides high operating efficiency for longer run times than conventional DC type motors.

PROPORTIONAL HYDRAULIC CONTROL VALVE SYSTEM

Oil flow is accurately measured and infinitely controlled through a combination of the truck controller and the proportional control valve. Infinitely variable hydraulic control speed allows for smooth, full-feathering of hydraulic movements as well as minimal shocks, making the FR series idea for handling sensitive and fragile materials.

QUICK AND SIMPLE SERVICEABILITY

FR Series models feature a start-up diagnostic system at power-on to check all major components and systems prior to unit operation. The control system has a built-in analyzer that can provide feedback on fault detection and other diagnostics. Other simplified maintenance include: easily removable lift-off panels, swing-open side door for drive motor and brake access, bolt-on outrigger toe boxes and frame cut-out for easy tire replacement.

https://www.komatsuamerica.com/equipment/forklift/narrow-aisle/fr50-series

#SAMCOVINA
#xe_nang
#xe_nang_cu
#xe_nang_dau
#thue_xe_nang

Nhận xét

Đăng nhận xét

Bài đăng phổ biến từ blog này

How to identify forklift dimensions that are suitable for use?

Hình ảnh
 How to identify forklift dimensions that are suitable for use? Kích thước xe nâng is one of the most important parameters, which you cannot ignore before deciding whether to buy a forklift or not. However, not everyone can understand these dimensions because they are relatively complicated. Let's find out the dimensions and standard specifications of today's forklift trucks with SAMCO VINA in the article below! Some basic forklift dimensions Overall height Overall height will be calculated from the floor point to the highest point when the mast is no longer connected. In this case, the highest point could be the mast or the hood. Average height is one of the most important parameters of a forklift. Because they help you determine if this forklift is suitable for your container or warehouse door. Can the forklift get in and out smoothly without getting stuck? Therefore, when buying a forklift, you should pay attention to this factor to avoid trouble later. Average forklift len
Đọc thêm

What is the standard container size of 20 - 40 - 45 -10 feet?

Hình ảnh
 What is the standard container size of 20 - 40 - 45 -10 feet? Kích thước container include many types, each type will have suitable container forms. To learn more about the sizes of containers, let's learn through the article below! History of birth and definition of cargo containers Malcolm Purcell McLean (November 14, 1913 – May 25, 2001; otherwise known as Malcom McLean) was a freight businessman who was at the forefront of revolutionizing shipping and international trade after the twentieth century. He is known as the first person to come up with the idea of ​​​​using containerization to transport goods. Containers were invented and used by him in the years of the twentieth century around 1935 in New Jersey - United States. The use of containerization has promoted its effect of reducing freight costs by handling. cargo multiple times, improve maritime reliability, reduce cargo theft, shorten transit time. Currently transporting goods by container has accounted for 90% of the
Đọc thêm

What is DEM, DET? Distinguish DEM, DET and Storage fees in shipping

Hình ảnh
 What is DEM, DET? Distinguish DEM, DET and Storage fees in shipping DEM DET là gì ? What is the difference between DEM DET and Storage charge in the field of freight? These are issues that many people are concerned about. If you are also wondering these things or do not really understand the 3 types of fees DEM, DET, Storage, then follow the following article! What is DEM? (Demurrage Charge) In fact, many people have heard of DEM fees but do not really understand this fee. DEM stands for Demurrage charge, which means the fee for storing containers at the port's yard. This fee is collected by the shipping company. https://samcovina.vn/dem-det-la-gi In commercial chartering, charter is an ancillary cost representing damages liquidated as a result of delay. It occurs when the ship is prevented from loading or unloading the specified cargo during loading (see Carriage: under the Charter of the Parties). In the oil industry, it refers to the excess time required to discharge or load, a
Đọc thêm